Mat and glossy lacquered PU painting cycle for chairs and turned

Support: solid woods in different veneers

  • Application of 2 or more coats of white PU sealer, spaced out of about 1 hour :
  • LBP578 cat. at 30% in weight with LCB178 dil. 10-20% with LZD091


  • About 5-6 hours later, preferably the day after, sanding :


  • Sanding with 280-320 grain paper
  • Application of the lacquered top-coat:
  • LFP40x range cat. at 50% with LCB185 dil. 20-30% with LZD091, one coat
  • LFP range of tintometric colours  cat. at 50% with LCB185 dil. 20-30% with LZD091 – 1 or 2 coats according to the colour
  • Wherever a particular resistance to yellowing is requested it is suggested the use of the same top-coat with a non-yellowing catalyst LCB190


  • LGP501 cat. at 100% with non-yellowing LCB131, dil.10-20% with LZD083 1 or 2 coats*
  • LGP  range of tintometric colours cat. at 100% with LCB131, dil. 10-20% with LZD083, 1 or 2 coats*


The preparation of the sealer as above described is valid also for all the cycles that include special effect top-coat as :

  • Texturized
  • Mother-of-pearl
  • Metallized
  • cracklè effect
  • etc…



* The application of 2 coats it is always suggested in case of glossy top-coat in order to assure the cover of colour and hide some possible sanding defects.



The use of alternative, but similar products to the ones mentioned in this working cycle does not jeopardise the final result. The evaluation based on costs, drying time, verticality, etc. can be influenced by different commercial or technical reason.


For the peculiar use of each product follow the data contained in the relevant Technical Data Sheet or ask for further information to the Laboratory.



Per l’impiego specifico di ogni prodotto attenersi ai dati contenuti nella relativa Scheda Tecnica, o chiedere ulteriori informazioni al Laboratorio.


Working code

WWC 08

cicli di lavorazione